My board is all finished and waiting for the enclosure (ordered) I have the Alpha systems probe which I purchased years ago with intent of buying their system later. My intent is to use the inspection port area under the right wing
(left side has pitot tube). Cut the base plate to fit rib and doubler for the inspection port. Use counter sunk metal screws to mount then cut hold to match probe in inspection plate. Tubing is in place in conduit. Set the angle of the probe at 50 degrees from the chord line. Any comments as to location and angle?
Mark
Thanks so much for providing individuals with an extraordinarily pleasant chance to read in detail from this blog. It is usually very cool and packed with amusement for me personally and my office friends to visit your blog minimum thrice a week to read through the new items you have. And lastly, we’re actually pleased with all the surprising knowledge you serve. Certain two tips on this page are in truth the best we’ve ever had. VISA INDIA PER A IOGA