Will do, thanks Vac!

Thanks for the clarification. I use Apple Pages (or emacs) instead of Word and can't be sure I wouldn't mess up the formatting or some other aspect of the word file if I edited it. Here are a few suggestions and typos (unless noted, page numbers are from the v3.2 pdf): Page 1: I suggest changing "OnSpeed Generation 2 Version 3.2 Assembly Procedure" to "OnSpeed Generation 2 Assembly Procedure Version 3.2." Page 3: Eliminate one of "Soldering iron tip cleaning sponge" or "A small damp sponge for cleaning the tip of your soldering iron." Page 5: This page is blank. (Thanks for fixing the front cover back photo.) Page 9 & 10 of the v3.1 pdf: I thought the consolidated parts list was useful, even though it was somewhat redundant. It was perfect for doing the inventory of my Mouser order. Page 19: The following: c) Install one of the 2.75-inch lengths on PS2 UPPER PORT 1. d) Install one of the 2.25-inch lengths on PS2 LOWER PORT 2. Should read: c) Install one of the 2.75-inch lengths on PS2 UPPER PORT 2. d) Install one of the 2.25-inch lengths on PS2 LOWER PORT 1. Or better: c) Install one of the 2.25-inch lengths on PS2 LOWER PORT 1. d) Install one of the 2.75-inch lengths on PS2 UPPER PORT 2. Page 25: "...motion if the part relative to the pins." should read "...motion of the part relative to the pins."

Hi all, I exchanged private emails with av888tor, so this is an update to the community. My 1st email: I’m lostinsuisse on both FlyOnSpeed and on VAF (but I’m just a lurker there). I live in Switzerland but have an RV4 in California (purchased, not built). I just ordered the electronic parts for the AOA from Mouser.ch, delivered to Switzerland, and will start building the board as soon as I can get the circuit board. As I live in Switzerland I could also be a source for tubing for European builders, if you’d like to send me more tubing than I’d need for a single build. I’m also happy to pay for that, and for shipping of course. I was planning on being in California now, but Covid-19 changed our plans. Next visit to California will be in June hopefully, and that’s when I’d need the tubing. The tubing isn’t needed until the end of the build, so I’m not in a hurry, just checking the possibilities. --- Av888tor's response: I would be happy to send you my excess tubing. I also have extra boards (Gen 2 Ver 3) that I could send. Please send Calif. address or the Europe address whichever you would prefer. I have 8 extra boards. They are the latest version. How many could you distribute. --- My response: Before we cancelled our trip to California I ordered 5 boards for delivery to California. If you could send four boards (one for me and three for others) and some of your excess tubing to Switzerland that would be great. After they arrive I’ll make an announce in a new forum post saying I can be a European source for the tubing and boards. At this time I don’t know of anyone in Europe who is interested in building, but I am imagining that such people will eventually exist and I could be a local source for them. Ah, I should also make that offer on VAF after I have boards and tubing in hand. Next time I’m in California I can send you some or all of my excess California boards if you like. --- Av888tor will be sending me some extra boards and extra tubing, so I will be able to be a local source for anyone in Europe building the Gen 2, Ver 3 AOA device. I'll make an announcement here and on VAF when I have the boards in hand. -jim

Hi Vac, I have tried twice to respond via email, but there seems to be a problem with the mail handler for flyonspeed.org. I’m sending from gmail. The error is: The response from the remote server was: 554 bosimpinc13 bizsmtp Connection refused - 209.85.210.196 Can you give me another email address to try until the problem is resolved, or contact me at the email in my flyonspeed profile? -jim